High-Performance End Mills

D1 1/2" D2 1/2" OAL 3" LOC 1-1/4" Our 3 flute end mills feature a 45° Helix Angle, Variable Index Flutes and are Center Cutting. This geometry gives them excellent chip removal capability especially at high RPM/high feed rate applications so common in today’s high-speed machining applications. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4" Our 3 flute end mills feature a 45° Helix Angle, Variable Index Flutes and are Center Cutting. This geometry gives them excellent chip removal capability especially at high RPM/high feed rate applications so common in today’s high-speed machining applications. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 3/4" D2 3/4" OAL 4" LOC 1-1/2" Our 3 flute end mills feature a 45° Helix Angle, Variable Index Flutes and are Center Cutting. This geometry gives them excellent chip removal capability especially at high RPM/high feed rate applications so common in today’s high-speed machining applications. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 1" D2 1" OAL 4" LOC 1-1/2" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 5/16" D2 5/16" OAL 2-1/2" LOC 3/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 3/8" D2 3/8" OAL 2-1/2" LOC 7/8" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1/2" D2 1/2" OAL 3" LOC 1-1/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 3/4" D2 3/4" OAL 4" LOC 1-1/2" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1" D2 1" OAL 4" LOC 1-1/2" 4 flute end mills perform exceptionally well in most ferrous materials such as steel and cast iron. They are also used with great success on Stainless Steel when coated with InoxoCon. They are intended for applications using Trochoidal or High-Speed Milling operations and feature a 40° Helix. Variable Index Flutes, Eccentric Relief, and are Center Cutting. Most of these diameters feature a Heal Grind to improve chip clearance. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 1/8" D2 1/8" OAL 1-1/2" LOC 1/2" 4 flute end mills perform exceptionally well in most ferrous materials such as steel and cast iron. They are also used with great success on Stainless Steel when coated with InoxoCon. They are intended for applications using Trochoidal or High-Speed Milling operations and feature a 40° Helix. Variable Index Flutes, Eccentric Relief, and are Center Cutting. Most of these diameters feature a Heal Grind to improve chip clearance. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills