High-Performance End Mills

D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4" Radius .020” 4 flute Ballnose and Radius End Mills perform exceptionally well in most ferrous materials. They are also used with great success on Stainless Steel when coated with InoxoCon. They are intended for applications using Trochoidal or High-Speed Milling operations and feature a 40° Helix. AlTiN offers very good performance in harder materials and is good in high speed milling operations. For improved tool life and performance we recommend FerroCon coating for all steels and steel alloys especially tool steel. For Stainless Steel milling we recommend InoxoCon. In the materials they are made to operate in the FerroCon and InoxoCon will dramatically improve the capability of the end mills over the standard coatings.

D1 1" D2 1" OAL 4" LOC 1-1/2" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 5/16" D2 5/16" OAL 2-1/2" LOC 3/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 3/8" D2 3/8" OAL 2-1/2" LOC 7/8" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1/2" D2 1/2" OAL 3" LOC 1-1/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 3/4" D2 3/4" OAL 4" LOC 1-1/2" These 3 flute end mills have a geometry designed to create a very sharp cutting edge while providing the teeth exceptional rigidity to hold up in difficult materials like Titanium. They have a 45° Helix Angle, Variable Index Flutes, Eccentric Relief and are Center Cutting, most importantly they have a Thicker Core for added rigidity.

D1 1" D2 1" OAL 4" LOC 1-1/2" 4 flute end mills perform exceptionally well in most ferrous materials such as steel and cast iron. They are also used with great success on Stainless Steel when coated with InoxoCon. They are intended for applications using Trochoidal or High-Speed Milling operations and feature a 40° Helix. Variable Index Flutes, Eccentric Relief, and are Center Cutting. Most of these diameters feature a Heal Grind to improve chip clearance. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4" 4 flute end mills perform exceptionally well in most ferrous materials such as steel and cast iron. They are also used with great success on Stainless Steel when coated with InoxoCon. They are intended for applications using Trochoidal or High-Speed Milling operations and feature a 40° Helix. Variable Index Flutes, Eccentric Relief, and are Center Cutting. Most of these diameters feature a Heal Grind to improve chip clearance. The gashes on the end face are particularly deep to allow for aggressive ramping of the end mills

D1 1" D2 1" OAL 4" LOC 1-1/2" The 5 flute end mills for steel can be run at increased speeds and feeds over the 4 flute end mills. The approximately 38° Helix Angle pulls chips quickly and the Variable Index with Individual Helix of the teeth eliminates vibration from harmonics to allow deep fast cuts. The deep gashes on the end face are particularly deep and the Eccentric Relief allows for aggressive ramping of the end mills. For machining steel, AlTiN is a standard and capable coating. For improved performance and tool life in steel and tool steel we recommend FerroCon and for difficult to machine Stainless Steels we recommend InoxoCon.

D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4" Radius .030” The 5 flute end mills for steel can be run at increased speeds and feeds over the 4 flute end mills. The approximately 38° Helix Angle pulls chips quickly and the Variable Index with Individual Helix of the teeth eliminates vibration from harmonics to allow deep fast cuts. The deep gashes on the end face are particularly deep and the Eccentric Relief allows for aggressive ramping of the end mills. For machining steel, AlTiN is a standard and capable coating. For improved performance and tool life in steel and tool steel we recommend FerroCon and for difficult to machine Stainless Steels we recommend InoxoCon.