D1 1" D2 1" OAL 4" LOC 1-1/2"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 1/4" D2 1/4" OAL 2-1/2" LOC 3/4"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 5/16" D2 5/16" OAL 2-1/2" LOC 3/4"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 3/8" D2 3/8" OAL 2-1/2" LOC 7/8"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 1/2" D2 1/2" OAL 3" LOC 1-1/4"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating
D1 3/4" D2 3/4" OAL 4" LOC 1-1/2"
5 flute end mills are for aggressive, high RPM
(10,000+) and high feed rate (350 IPM+) milling of
aluminum. The 38° Helix Angle pulls chips quickly
and the Variable Index of the teeth eliminates
vibration from harmonics to allow deep fast cuts.
The deep gashes on the end face are particularly
deep and the Eccentric Relief allows for aggressive
ramping of the end mills. These tools are only available in AluSpeed coating