D1 5/16" D2 5/16" OAL 2-1/2" LOC 3/4"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 3/8" D2 3/8" OAL 2-1/2" LOC 7/8"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 1/2" D2 1/2" OAL 3" LOC 1-1/4"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 5/8" D2 5/8" OAL 3-1/2" LOC 1-1/4"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills
D1 3/4" D2 3/4" OAL 4" LOC 1-1/2"
Our 3 flute end mills feature a 45° Helix Angle,
Variable Index Flutes and are Center Cutting.
This geometry gives them excellent chip removal
capability especially at high RPM/high feed rate
applications so common in today’s high-speed
machining applications. The gashes on the end
face are particularly deep to allow for aggressive ramping of the end mills