Carbide Jobber Drill 1.32mm 2-Flute
Product Overview
Looking for precision and durability in your drilling projects? Our Carbide Jobber Drills offer just that with unmatched toughness and precision engineering. Designed for metalworking professionals seeking reliable performance, these drills stand up to the toughest tasks.
If you’re someone who demands accuracy, efficiency, and longevity, these are the drills you want in your toolbox. Their carbide build means they stay sharper longer and cope with harder materials effortlessly. Plus, the split point design reduces walking for spot-on starts every time.
Perfect for both industrial and workshop use, these drills deliver consistent results on metals and other tough materials. Ready to up your drilling game? This tool’s precision and build quality are here to help you get the job done right.
Key Features
- High-quality carbide construction for maximum durability
- 2-flute design promoting efficient chip removal
- 20-degree helix angle for optimized cutting action
- 118-degree four-facet split point reduces walking for precise starts
- Tight diameter tolerance of +.000/-0.0005 for accurate drilling
- Flute length of 3/4 inch designed for versatile drilling depths
- Overall length of 1-1/2 inch suitable for standard applications
- Diameter size at .052 inch (1.32 mm) fits fine precision drilling needs
- Compatible with a wide range of metalworking setups
- Standard Jobber Drill category ensures widespread usability
Specifications
- Shape / Type: Carbide Jobber Drill
- Cut Type: Carbide Jobber Drill
- Head Diameter: 0.052 inch (1.32 mm)
- Shank Diameter: 0.052 inch (1.32 mm)
- Overall Length: 1-1/2 inch
- Flute Length: 3/4 inch
- Helix Angle: 20 degrees
- Point Angle: 118 degrees, four facet split point
- Tolerance: Diameter +.000 / -.0005
- Material Compatibility: Suitable for metals and hard materials
- Brand / Manufacturer: Burrs4Less
- Made In: USA
- SKU / Part Number: 30138
Trusted Toughness and Longevity with Burrs4Less Carbide Drills
When you’re counting on a tool, durability isn’t just a nice-to-have—it’s essential. Our carbide jobber drills come from decades of Burrs4Less expertise, combining innovation with rugged construction. Because carbide lasts longer and resists wear better than typical steel options, businesses experience fewer interruptions from tool changes and less downtime. This means smoother production schedules and better consistency in the output, translating directly into money saved and tighter project timelines.
Beyond the cutting edge, Burrs4Less drills reflect our commitment to quality and precision. Designed and manufactured in the USA with strict tolerances, these tools uphold our reputation in the industry as reliable and trusted suppliers. They’re also engineered to work efficiently with cutting fluids and resist heat build-up, reducing energy waste and extending both tool and machine life—making them smart, sustainable choices for modern metalworking shops looking to perform at their best without compromise.
Case Study: Real Business, Real Results
Chicago, IL – Looking to improve drilling precision on high-grade steel components, Metalworks Inc. upgraded to our Carbide Jobber Drills.
"Switching to these carbide jobber drills significantly cut down on rework time because of their precision and clean cuts. The durability also meant fewer tool changes, saving us both time and money."
Jessica Ramirez – Production Manager
Increased drilling accuracy by 30% and reduced tool replacement frequency by 50%
Why the Four-Facet Split Point Delivers Superior Accuracy
The four-facet split point is a smart design that helps the drill bit start exactly where you want it without wandering. Think of it like placing the tip of a pencil precisely before drawing a line — it stabilizes the bit, reducing “walking” on the surface. This saves time because you don’t have to constantly realign your drill, especially on hard metals where precision matters most.
This design also cuts down the initial pressure needed for drilling, making the process smoother and extending the life of your drill bit. It’s the small detail that makes a huge difference in daily metalworking tasks.
Installation and Maintenance Guide
Setting It Up
- Ensure your drill chuck can securely hold the 0.052 inch shank diameter
- Clean the drill chuck thoroughly before inserting the bit for best grip
- Insert the drill fully into the chuck and tighten firmly to prevent slippage
- Check the drill is aligned straight to avoid off-center drilling
- Start drilling at low speed to test stability before full operation
Keeping It Going
- Regularly clean the drill bit after use to remove metal shavings
- Inspect the cutting edges for dullness or damage before each job
- Use proper cutting fluid to reduce heat and extend tool life
- Store drill bits in a dry place to prevent corrosion
- Sharpen carbide drills professionally when cutting edges show wear
Frequently Asked Questions
Q: What materials can these carbide jobber drills cut through?
They are ideal for drilling metals, including stainless steel and hardened materials, as well as some tougher alloys.
Q: What is a four-facet split point and why is it useful?
It’s a drill tip design that reduces walking and improves precision when starting the hole.
Q: Can these drills fit in standard drill chucks?
Yes, the 0.052 inch shank diameter fits most standard chucks designed for jobber drills of this size.
Q: What is the recommended flute length used for?
The 3/4 inch flute length helps efficiently remove metal chips during drilling to avoid clogging.
Q: How tight are the tolerances on these drills?
The diameter tolerance is +.000/-.0005 inches, ensuring highly accurate hole sizes.
Q: Are these drills suited for both manual and CNC machines?
Absolutely, they work well in both setups thanks to their high precision and durability.
Q: How should I maintain these carbide drills?
Regular cleaning, using cutting fluid, and professional sharpening extend their lifespan.
Q: What does the 20-degree helix angle affect?
It optimizes the cutting action and chip removal, enabling smoother drilling.
-
Q: How do I know when it’s time to Replace or Resharpen the burr?
Replace or Resharpen it when you notice decreased cutting efficiency or visible wear on the cutting edges.
Why Choose Burrs4less?
Discover top reasons to pick our carbide burrs for your projects. Factory-direct quality at wholesale prices.
-
Premium Quality
Pro-grade tungsten carbide burrs for durable, precise work.
-
Affordable Pricing
Wholesale rates from USA manufacturer, high performance.
-
Fast & Free Shipping
24-hour shipping, free on $100+ orders.
-
Expert Guidance
Team assists in picking ideal burr for materials.
Ready for Order
Don’t let your projects suffer from unreliable tools — stock up on our Carbide Jobber Drills today and enjoy precision drilling with lasting durability. Place your order now and experience the difference of premium carbide craftsmanship crafted for professionals like you.
#CarbideDrills#MetalworkingTools#PrecisionDrilling#JobberDrill#CuttingTools#Burrs4Less#CNCDrilling#IndustrialDrillBits#USAManufacturer#ToolDurability